Dynomotion

Group: DynoMotion Message: 7197 From: dvargasr08 Date: 4/7/2013
Subject: Cam Function
Hi,

Via this way I wanna know if your products (KMotion) count with function to implement Electronic Cam Table to synchronize master-slave axis.

Thanks.
Group: DynoMotion Message: 7198 From: Tom Kerekes Date: 4/7/2013
Subject: Re: Cam Function
Hi,

You would need to be more specific.  There is a built in master/slave capability.  But to do some type of nonlinear slaving you would need to write a KFLOP C Program to move one axis as a function of another. 

HTH
Regards
TK

Group: DynoMotion Message: 7200 From: dvargasr08 Date: 4/7/2013
Subject: Re: Cam Function
Hi,

That is what I really want to do, built nonlinear slaving in C code. Can you send me an example of this application in KMotion.

Thanks.

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi,
>
> You would need to be more specific.  There is a built in master/slave capability.  But to do some type of nonlinear slaving you would need to write a KFLOP C Program to move one axis as a function of another. 
>
> HTH
> Regards
> TK
>
>
>
> ________________________________
> From: dvargasr08 <dvruiz17@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, April 7, 2013 10:56 AM
> Subject: [DynoMotion] Cam Function
>
>
>  
> Hi,
>
> Via this way I wanna know if your products (KMotion) count with function to implement Electronic Cam Table to synchronize master-slave axis.
>
> Thanks.
>
Group: DynoMotion Message: 7202 From: Tom Kerekes Date: 4/7/2013
Subject: Re: Cam Function
See attached

Regards
TK

Group: DynoMotion Message: 7203 From: dvargasr08 Date: 4/7/2013
Subject: Re: Cam Function
Dear Mr.Tom,

Thanks for your quick respond to my question.

Daniel

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> See attached
>
> Regards
> TK
>
>
>
> ________________________________
> From: dvargasr08 <dvruiz17@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, April 7, 2013 11:48 AM
> Subject: [DynoMotion] Re: Cam Function
>
>
>  
>
> Hi,
>
> That is what I really want to do, built nonlinear slaving in C code. Can you send me an example of this application in KMotion.
>
> Thanks.
>
> --- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@> wrote:
> >
> > Hi,
> >
> > You would need to be more specific.  There is a built in master/slave capability.  But to do some type of nonlinear slaving you would need to write a KFLOP C Program to move one axis as a function of another. 
> >
> > HTH
> > Regards
> > TK
> >
> >
> >
> > ________________________________
> > From: dvargasr08 <dvruiz17@>
> > To: DynoMotion@yahoogroups.com
> > Sent: Sunday, April 7, 2013 10:56 AM
> > Subject: [DynoMotion] Cam Function
> >
> >
> >  
> > Hi,
> >
> > Via this way I wanna know if your products (KMotion) count with function to implement Electronic Cam Table to synchronize master-slave axis.
> >
> > Thanks.
> >
>